The Pramac PX8000 petrol generator is built for trade users who need dependable power on site. With 6.0 kVA emergency standby output and 5.0 kVA continuous rating, it has enough capacity to run larger power tools, site lighting and small plant on construction jobs and other demanding work. Dual voltage 230/115 V output and an AVR system make it suitable for a wide range of equipment, including tools that need a stable supply.

A Stage V 4 stroke OHV engine runs at 3000 rpm and uses electric start, so day to day use is straightforward. The 27 litre steel fuel tank, combined with modest fuel use, gives around 13.5 hours of runtime at 75 percent load and just over 10 hours at full load. That will see most crews through a full shift without refuelling. The AVR keeps voltage within a tight band as loads change, which helps protect tools and reduces nuisance trips on sensitive kit.

The PX8000 is supplied ready to use with a wheel and handle kit already fitted. The tubular frame protects the engine and alternator and makes the set easier to move across rough ground or load into vehicles. On the control panel you get a simple selector switch, a digital display for volts, frequency and hours, a fuel gauge and clear quick start instructions. Thermal protection and an oil guard system provide extra reassurance when the generator is in regular use on busy sites.

Key features

• Model: Pramac PX8000 petrol generator.
• Emergency standby power: 6.0 kVA, 5.4 kW.
• Continuous power: 5.0 kVA, 4.5 kW.
• Voltage: 230/115 V, 50 Hz, single phase.
• Stage V 4 stroke OHV petrol engine (Pramac SR190F), 3000 rpm.
• Electric start.
• AVR automatic voltage regulation.
• Fuel tank capacity: 27 litres, with fuel gauge and fuel filter.
• Fuel consumption at 75 percent load: about 2.00 litres per hour.
• Fuel consumption at 100 percent load: about 2.66 litres per hour.
• Runtime at 75 percent load: about 13.5 hours.
• Runtime at 100 percent load: about 10.15 hours.
• Noise pressure level at 7 m: around 69 dB(A).
• Noise level LWA: 97 dB(A).
• Integrated wheels and folding handle for transport.
• Quick start guide stored on the control panel.

Control panel and sockets

• Selector switch: OFF, ON.
• Digital display: voltmeter, frequency meter, hourmeter, fuel gauge.
• Protections: thermal protection, oil guard.
• Sockets:
• 1 x 2P+T CEE 115 V 32 A IP44.
• 1 x 2P+T CEE 230 V 32 A IP44.

Key specifications

• Frequency: 50 Hz.
• Power factor: 0.9.
• Phase: single phase.
• Engine model: Pramac SR190F, 420 cm³, air cooled, mechanical governor.
• Fuel: petrol.
• Oil capacity: 1.1 litres.
• Alternator class: F.
• IP protection: 23/44.
• Poles: 2.
• Voltage regulation: electronic, with AVR fitted as standard.
• Dimensions L x W x H: 727 x 515 x 670 mm.

All ratings are for guidance. For critical runtime planning or lifting limits, please refer to the latest Pramac datasheet or confirm exact figures with your supplier.