The Phantom 3600w Gutter Vacuum with Anti-Conductive Clamped Carbon Fibre and 51mm Rigid Neck is built for professional gutter cleaners who need strong suction, high reach and added safety in one complete setup. Designed by GVS for commercial and industrial use, the Phantom uses three individual 1200w motors to deliver 3600w of total power, producing 11,166 LPM airflow and 82 inches of water lift. This package combines that high output vacuum with an anti-conductive clamped carbon fibre pole kit and a 51mm carbon rigid neck, giving you a serious high level gutter clearing system with height options from 20ft to 40ft.

The Phantom is built around practical features that help on long working days. An electronic float valve automatically cuts power as the drum fills, while a front lever redirects airflow to help clean dust from the white dry use HEPA filter. Switching between dry and wet setups is simple by rotating the float valve unit and changing to the green wet use filter, with a built in deflector helping shield the filter from incoming debris. The vacuum sits on a heavy duty full steel tipping trolley with puncture proof rear wheels and fully rotational locking castors, making it durable and easy to handle across different sites.

This package also includes the anti-conductive 51mm clamped carbon fibre pole kit, supplied in your choice of 20ft, 25ft, 30ft, 35ft or 40ft, together with a 65 degree carbon rigid neck and a practical four pocket pole bag. Each 1.5m pole section is made from 100% carbon fibre with two layers of anti-conductive shock-resistant fabric and is designed and tested for up to 10,000 volts, giving added reassurance when working near electrical hazards. The kit also includes the everyday Dirtbreaker, the 51mm GVS Gulper and a 51mm Crevice nozzle, so you can handle general debris, stubborn blockages and narrow gutters with one trade ready package.

Features

• Commercial and industrial 3600w triple motor gutter vacuum.
• 3 x individual 1200w motors delivering 11,166 LPM airflow and 82" water lift.
• 100 litre drum capacity for productive gutter clearing with fewer emptying stops.
• Electronic float valve automatically shuts off power as the drum fills.
• Front lever redirects airflow to help clean the white dry use HEPA filter.
• Green wet use filter included for wet debris cleaning.
• Heavy duty full steel tipping trolley with puncture proof rear wheels and locking castors.
• 240V 16A plug for generator use, minimum 5.5kVA.
• Built in RCD adaptor with 13A plug for mains connection.
• 8m power cable.
• 76dB operating noise level.
• 72mm cyclonic inlet.
• IP44 rated.
• Supplied with 51mm diameter 10 metre hi-vis hose and 51mm hose cuff.
• Anti-conductive clamped carbon fibre pole kit available in 20ft to 40ft options.
• Each pole section measures 1.5m x 51mm and weighs 485g.
• Built from 100% carbon fibre with two layers of anti-conductive shock-resistant fabric.
• Designed and tested for up to 10,000 volts.
• 65 degree carbon rigid neck takes 51mm diameter nozzles.
• Includes four pocket pole bag for easier transport and storage.
• Time saving quick interlock system.
• Forced stop to eliminate over pushing poles.
• Reinforced ring and quick release clamp for securing 51mm nozzles.
• Supplied with Dirtbreaker, GVS Gulper and Crevice 51mm nozzles.

Pole kit options

• 20ft kit: 1 x base pole, 3 x additional poles.
• 25ft kit: 1 x base pole, 4 x additional poles.
• 30ft kit: 1 x base pole, 5 x additional poles.
• 35ft kit: 1 x base pole, 6 x additional poles.
• 40ft kit: 1 x base pole, 7 x additional poles.

For your shipping setup only: Base vacuum unit: